|
||
|
|
|
|
|
|
|
|
|
Specifications |
||||||
|
Ball |
|
Body | ||||
| * | 52100 Bearing Steel | * | Alloy Steel | |||
| * | Heat Treated | * | Heat Treated | |||
| * | Hard Chrome Plated | * | Protective
Coated for Corrosion Resistance |
|||
| * | Precision Ground on All Surfaces | * | Alloy Steel Extreme High Strength | |||
| * | Teflon/Kevlar Self Lubrication Race | |||||
Part Number |
Dimensions in Inches |
|||||||||||
| Right Hand | Left Hand | B | Bolt Size |
W | T | A | D | C | Thread | Misalign- ment Angle |
Static
Load lbs |
Price |
XMR10-12
|
XML10-12
|
.6250 | 5/8" | .750 | .562 | 2.875 | 1.750 | 1.750 | 3/4-16 | 13 | 40,572 | $29.50 |
|
XMR12
|
XML12
|
.750 | 3/4" | .875 | .687 | 2.875 | 1.750 | 1.750 | 3/4-16 | 14 | 28,081 | $29.50 |
|
XMR16
|
XML16
|
1.0 | 1" | 1.375 | 1.0 | 4.125 | 2.75 | 2.125 | 1 1/4-12 | 17 | 76,200 | $68.75 |
|
XMR12-14
|
XML12-14
|
.875 | 3/4" | .875 | n/a | 3.375 | 2.00 | 1.875 | 7/8-14 | $35.75 | ||
| * | The static loads listed are NOT typos, the 5/8 bolt are stronger than the 3/4. | ||
| * | Poison Spyder Customs heims are the toughest heims available | ||
| * | Before you purchase a less expensive heim, compare the static load. | ||
 | ||
|
|
Part Number |
Specifications |
Price |
|
||
| Right Hand | Left Hand | Thread | Bolt Size |
Price |
|
|
BB34
|
N/A |
3/4 - 16 | 3/4 or 5/8* | $39.00 | |
| * | Boulder bushings can be used as a link attachment point when heims are not desired. |
|
| * | Bushings are graphite impregnated polyurethane. | |
| * | Bushings are molded for 3/4" bolt. If requested, a sleeve to accept a 5/8" bolt can be added. |
| ||
|
|
Part Number |
Specifications |
Price |
|
||
| Right Hand | Left Hand | Shaft | Thread |
$ |
|
|
RJ3416
|
LJ3416
|
3/4 | 16 | $2.00 | |
|
RJ111618
|
LJ111618
|
11/16 | 18 | $4.45 | |
|
RJ7818
|
LJ7818
|
7/8 | 18 | $4.45 | |
|
RJ22
|
LJ22
|
1/2 | 22mm | $4.45 | |
|
RJH7814
|
LJH7814
|
7/8 | 14 | $2.00 | |
|
RJ11412
|
LJ11412
|
1 1/4 | 12 | $12.50 | |
| * | RJ3416 & LJ3416 fit XM Series Heims |
|
| * | RBJAM & LBJAM fit HM Series Heims | |
| * | JAM nuts lock heims or Tie Rod Ends in position |
| ||
|
|
Part Number |
Specifications |
Price |
|
||
| Right Hand | Left Hand | Shaft/ | Thread |
$ |
|
|
RTA3416
|
LTA3416
|
3/4 | 16 | $12.25 | |
|
RTAH7814
|
LTAH7814
|
7/8 | 14 | $12.25 | |
|
RTA11412
|
LTA11412
|
1 1/4 | 12 | $25.00 | |
| * |
Tube adapters are designed to be welded
into 1" inside diameter tubing. |
|
| * |
Tube adapters allow the construction of
links without having to tap the tubing to accept a heim joint. |
|
| * |
Tube adapters are only available for the XM series heim (3/4-16 thread). |
| ||
|
|
Part Number |
Specifications |
Price |
|
|
| Height | Bolt Size | $ | ||
|
MB5858
|
5/8" | 5/8 | $3.50 | |
|
MB5834
|
5/8" | 3/4 | $4.25 | |
|
* |
Misalignment bushing spaces heim away from mounting surface and allows full movement of heim and link. |
|
| ||
|
|
||
|
|
|
| * | Link brackets give your link a double sheer attachment point. | ||
| * | Brackets prevent bolt failure. | ||
| * | Brackets have a 5/8" through bolt hole, but can easily be drilled to 3/4" if 3/4 heims or Boulder bushings are being used. | ||
Part Number |
Price |
|
SB01
|
$10.50 |
| ||
|
|
||||
|
|
|
|
||
| Link tabs are critical for your suspension. Poison Spyder Customs offers these severe duty tabs to prevent off-road failures. Our 1/4" link mounting tabs are the strongest production tabs in the off-road industry. | |||
| Part Number | Material Thickness | Bolt Size |
Height | Mounting Radius | Typical Use | Price |
|
BURLEYLRG
|
1/4" | 5/8" | 2 1/4" |
2 1/2" - 4" |
H.D. Axle Mount | $4.70 |
|
BURLEYSML
|
1/4" | 5/8" | 2 1/8" | 1 3/4" | H.D. Axle Mount | $4.25 |
|
SLIPPERYLRG
|
1/8" | 5/8" | 2 1/2" | 3 - 4" | Axle Mount | $3.10 |
|
SLIPPERYMD
|
1/8" | 1/2" | 1 5/8" | 1 3/4" | Shock Mount | $2.50 |
|
SLIPPERYSML
|
1/8" | 1/2" | 1 3/4" | 1 1/4" | Shock Mount | $2.50 |
|
|
|
|
|
||
|
Burley Large |
Burley Small |
Slippery Large |
Slippery Medium |
||
| * | Burley tabs and large slippery tabs can easily be drilled to accept a 3/4" bolt. | ||
| * | Tabs are crafted from mild steel. | ||
| * | Larger mounting radiuses can be achieved with slight grinding. | ||
| * | Burley tabs are highly recommended for machines with 300 h.p. or more, additionally with 36" or larger tires. | ||
| ||
|
|
|
|
|
|
||
Rock Rings with link support are an easy and multi-functional component for any link controlled suspension.
|
||||
| ||
|
|
* |
Links can be constructed from many types of materials, thickness, and configurations. Please call for specific pricing and support. |
|
| ||
|
|
* |
Tubing can be purchased separately |
|
* |
Tubing can be shipped in 6 ft. lengths. |
|
* |
1.5" .250 Wall D.O.M. - $8.81 ft. |
